241 heads front bolt size
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Dec 2008
Location: Honolulu, HI *RiceTown USA*
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
241 heads front bolt size
2002 z28 w/ stock 241 heads. Just bought a Catch can from WS6 Store <RpmSpeed> but they didn't include the bolt that mounts the can bracket to the Front of the passenger side head. information from anyone who knows the size of the bolt needed for the unused holes on the front of 241 ls1 heads
or someone who has a catch can mounted to the head Would Be Greatly Appreciated So I can Get this finished. The Guy at Napa was an Asshat, I ended up with a 8mmx30mm 1.25 bolt that was too small and a bit long and don't really want to sit in the parking lot trying all the possibilites.
Thanks.
Respectfuly,
RiceEaterZ.
or someone who has a catch can mounted to the head Would Be Greatly Appreciated So I can Get this finished. The Guy at Napa was an Asshat, I ended up with a 8mmx30mm 1.25 bolt that was too small and a bit long and don't really want to sit in the parking lot trying all the possibilites.
Thanks.
Respectfuly,
RiceEaterZ.