Where do i move the coils with these valve covers... Engine Cleanup
06-08-2009, 02:18 PM
#1
Teching In
Thread Starter
Join Date: Mar 2009
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Where do i move the coils with these valve covers... Engine Cleanup If I get these valve covers : 
Where do i put the coils.... can i make it look like a small block...
WILL THIS KIT WORK: http://www.byunspeed.com/product_inf...5285671893ae58
If anyone has any other opinions or pics on how to clean up the engine it would be greatly appreciated..
Where do i put the coils.... can i make it look like a small block...
WILL THIS KIT WORK: http://www.byunspeed.com/product_inf...5285671893ae58
If anyone has any other opinions or pics on how to clean up the engine it would be greatly appreciated..
06-08-2009, 05:16 PM
#6
Some all-thread rod, nuts and washers, cut some spacers and tabs and get some extension harnesses and do it yourself. Look around and find some room. On my C5 the passenger side are right of the battery and on the driver's side they are behind the inner fender.
06-08-2009, 05:46 PM
#7
https://ls1tech.com/forums/sponsor-s...nce-parts.html
Lots of very happy people with my kit. Wires are pre-made and gauranteed for life vs defects. You can not build this set yourself for less. The Superconductor wire set alone would cost $ 121 and my brackets are powder coated after an acid bath prep.
Lots of very happy people with my kit. Wires are pre-made and gauranteed for life vs defects. You can not build this set yourself for less. The Superconductor wire set alone would cost $ 121 and my brackets are powder coated after an acid bath prep.