FastKat

iTrader: (10)

I need to buy a boot for my PCV valve. I was able to get the valve with no problem, but my parts guy can't find a part number for the boot with the grounding strap that holds the PCV valve.

I included a picture to show exactly what I am talking about.

Anybody have a part number for this? Anybody have one they want to sell me?

Thanks, -Dave

massls1guy

iTrader: (9)

The list I have shows that piece as part of sub-assembly #12562580. I didn't see that number listed much on google and not found at sdparts.com (SDPC). I think your best bet is to try to find one used in the for sale section.

Here's a thread with a few pics as well:
http://forums.corvetteforum.com/c5-g...asap-help.html

Viper

iTrader: (6)

GM parts doesn't sell it individually; they make you buy the whole line kit.

Beau@SDPC

iTrader: (14)

correct, from what i can see its part of the whole new assembly 12590632

Fireberg

Yep, been there, done that.
The dealers want ~ $100.00 for that line kit.

You can get it for about $60.00 from internet GM parts sellers.

If you have a vacuum leak, elctrical tape will buy you some time.

Beau@SDPC

iTrader: (14)

survey says 84.90....
http://www.sdparts.com/product/12590632/TUBE.aspx

rich Z

Just do this. http://www.ls1.com/forums/showthread...ht=pcv+housing

FastKat

iTrader: (10)

Agh, I don't want to buy the whole line for $85 and I don't really want to make it out of a brass hose fitting - but thanks for the posts!!

Did the 5.3's or the 6.0's in the trucks have the same PCV valve boot? I can start checking the salvage yards.

chevyridinhigh22

iTrader: (5)

Im in the same boat as you... I dont really wanna modify the valve up, but its either that or 100 dolla...

Drdoom

I need that 2 line into 1 rubber fitting, on the back of the block. running to the PCV.

demonspeed

iTrader: (7)

For the cost of replacing the entire line, one can do the '04 LS6 PCV conversion. Interested in going cheaper? Just get some rubber heater hose.