LS1 Crankshaft freeze plug?
04-27-2010, 03:15 PM
On The Tree
Join Date: Sep 2004
| | LS1 Crankshaft freeze plug?
Hey guys I'm trying to get a new freeze plug for the crank. The plug that sits behind the pilot bearing.
Does anyone know either the size, the dorman part number, or the gm part number?
04 Z06, lowered on stock bolts, 18/19 Black cray scorpions w/ g-force rubber,6000k hid, euro tailights, raptor shift lite,b&m shifter,callaway k&n honker intake, A/R headers/ catted x, powerbond underdrive pulley, 160 t-stat, RPM Motors Inc cam, GM parts bin motor, crane 833 dual springs.
98 A4 t/a,forged 383, TNT F2, 224/228 114, patriot heads, macs , slp dual dual w/ cut out, midwest 3500, baer, bmr everthing eibach prokit, bilstein. konig appeal 17x9.5 built 8.8 rear w/3.73s
04-27-2010, 05:41 PM
Join Date: May 2009
I think the small ones are 16mm and the big ones are 30mm? Someone will correct me if im wrong.
1998 Pontiac Trans Am WS6
SLP lid, Magnaflow Cat-back, 4:10's, Ported TB, MGW short throw, TSP 1 7/8" headers, TSP ORY, DMH electronic cutout, LS6 intake, 42# SVO injectors, Pat G custom cam, 243 heads w/ patriot golds, hptuners tuned by Frost / me
Future: clutch, dyno tune, 9 inch?!
04-27-2010, 09:07 PM
Join Date: Nov 2005
Part # 24502262 is listed at the bottom of this thread, I think it's correct:http://www.ls1tech.com/forums/manual...-screw-up.html
I would just get it at the stealership if I was you.
__________________ 2001 Z28 Pewter MN6 ASR T tops.
Mods: TR224 114lsa, 243s, SLP Lid, SLP pulley, NW 90mm TB, LS6* intake, FRPP 30# injectors,
SSRA, Dynatech LTs & Y w/cats, Magnaflow cat back, 17x9 ZR1s, LS7 clutch, Slowhawk tuned.
Latest project: Replaced all suspension wear items incuding bushings. Ball buster.
| Tags |
|16mm, 24502262, 30, crank, crankshaft, cut, expansion, freeze, ls1, mm, number, part, pilog, plug, plugs, soft || |