Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

vibrations when makeing left turns

Thread Tools
 
Search this Thread
 
Old 06-22-2010, 07:22 PM
  #1  
TECH Apprentice
Thread Starter
iTrader: (6)
 
30th6's Avatar
 
Join Date: Feb 2009
Location: florence,al
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts

Default vibrations when makeing left turns

i feel a small vibration all the time about 60+. i always have had a vibration since day one of my moser 9in, its been in two different cars, 5 different drive shats, 4 different sets of wheels,and ive adjusted the pinion angle to the moon and back.
now when i go into a left turn at crusin speeds i feel more of a vibration than normal.
also my passenger rear tire/wheel is jumping like crazy it will shake the pass seat. ive had 3 different wheels and tires on it and it does it with all 3.
now i pulled my isolators off about a month ago would that have any effect on the new vibrations or wheel hopping?
ive got 35 spline axels and a spool.the best 60ft ive pulled was a 1.6,so there shouldnt be anything wrong with the axels.the wheel bearings have about 3k miles on them.

any suggestions?im about ready to quit on this car.




All times are GMT -5. The time now is 11:38 AM.