Edelbrock 245cc heads from WCCH...
06-22-2010, 08:34 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Edelbrock 245cc heads from WCCH... The guys over at West coast cylinder heads have been great to deal with and I decided to pick up a set of their 4 bolt 245cc Edelbrock heads. I was just wondering if anybody had any dyno sheets using these bad boys or any real world results with them? Thanks www.westcoastcylinderheads.com
06-23-2010, 01:22 AM
#2
TECH Veteran
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
Not a common piece. If you got a deal, then go for it, but for the price (MSRP) you can get AFR's or TFS bare which are both proven to flow ridiculous numbers and have solid gains.
I think there was an article in GMHTP a WHILE ago when they did a 383 build in a red TA and they used those heads.
-=EDIT=-
Found it. Google actually works better than searching their site.
http://www.gmhightechperformance.com...gue/index.html
I think there was an article in GMHTP a WHILE ago when they did a 383 build in a red TA and they used those heads.
-=EDIT=-
Found it. Google actually works better than searching their site.
http://www.gmhightechperformance.com...gue/index.html
Last edited by bayer-z28; 06-23-2010 at 01:30 AM.
