Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

what mufflers with X pipe TDs?

Old 08-06-2010, 12:40 PM
  #1  
TECH Addict
Thread Starter
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Talking what mufflers with X pipe TDs?

as it says, what mufflers to get for a TDs with X pipe, planning to run LTs, 2.5" over the axle with no cats, got my LT's and my X pipe but have no idea about mufflers i dont want to go insanly loud just a decent sound. also, where to get them from and where to place them on my setup? any info and sound clips is appreciated. thanks
Old 08-06-2010, 12:57 PM
  #2  
On The Tree
iTrader: (2)
 
tmoney223's Avatar
 
Join Date: Oct 2007
Location: Keizer, OR
Posts: 143
Received 0 Likes on 0 Posts

Default

SLP loud mouth 2's...not loud intell you want it to be..i paid 218 for both of mine and they are a bullet style muffler.. but cant remember where i got them.


Originally Posted by omarrakeen
as it says, what mufflers to get for a TDs with X pipe, planning to run LTs, 2.5" over the axle with no cats, got my LT's and my X pipe but have no idea about mufflers i dont want to go insanly loud just a decent sound. also, where to get them from and where to place them on my setup? any info and sound clips is appreciated. thanks
Old 08-06-2010, 02:00 PM
  #3  
TECH Addict
Thread Starter
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Default

yep i was confused between SLP lm or dynomax not sure yet.
Old 08-06-2010, 02:04 PM
  #4  
TECH Senior Member
iTrader: (96)
 
01ssreda4's Avatar
 
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 79 Likes on 70 Posts

Default

single chamber flowmasters
Old 08-06-2010, 02:07 PM
  #5  
TECH Addict
Thread Starter
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Default

can you link me to that? i never had any true duals before so am not expirenced with it..
Old 08-06-2010, 02:13 PM
  #6  
12 Second Club
 
shaun's Avatar
 
Join Date: Nov 2005
Posts: 1,848
Likes: 0
Received 0 Likes on 0 Posts
Default

go to www.ls1sounds.com they have a lot of sound clips.
Old 08-06-2010, 02:13 PM
  #7  
TECH Addict
Thread Starter
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Default

yea ok i found them thanks. any more opinions?
Old 08-06-2010, 02:14 PM
  #8  
TECH Addict
Thread Starter
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by shaun
go to www.ls1sounds.com they have a lot of sound clips.
yea am checking it as well. thanks
Old 08-06-2010, 02:21 PM
  #9  
Staging Lane
iTrader: (2)
 
Mguncowboy's Avatar
 
Join Date: Feb 2010
Location: Baytown, Texas
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts

Default

Single chamber Flowmasters without a doubt are the most wicked sounding mufflers on a x-pipe w dumps. However they are very loud, and holding a conversation on the phone or talking to a passenger without yelling will be a thing of the past. If you drive the car much the loud droning sound of the single chambers will give you a headache. I swapped mine out for a set of Borla XR-1's and couldn't be happier. They fit better under the car too. They sound great but aren't over powering. You can still hear your self think while driving and I get fewer ugly stares from the Po..Po at traffic lights. If you don't mind the noise levels nothing sounds better than the single chambers, if you want a notch down on decibles and still keep a great tone go with the borlas, I did and I've never regreted it.
Old 08-06-2010, 02:32 PM
  #10  
TECH Addict
Thread Starter
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Default

holy **** noway flowmasters then! am going over the axle tho its my DD and i dont want to get a Y pipe...just something different.
Old 08-07-2010, 04:42 PM
  #11  
On The Tree
iTrader: (2)
 
tmoney223's Avatar
 
Join Date: Oct 2007
Location: Keizer, OR
Posts: 143
Received 0 Likes on 0 Posts

Default

Wow blowmaster finally came out worth spending money on..

I have a 3" xpipe going into 2.5" under the axles and have no probs
Old 08-07-2010, 04:51 PM
  #12  
12 Second Club
iTrader: (13)
 
WSsick's Avatar
 
Join Date: Apr 2008
Location: St. Peters, MO
Posts: 2,418
Likes: 0
Received 3 Likes on 3 Posts
Default

I love my Dynomax Bullets. Mine are dumped before the axle, but the sound is great! A friend even said it sounded like a Vette, and he was 1/2 mile away . Its quiet when im cruising at low RPMs and decently loud at part throttle, but screams at WOT. I've recieved nothing but compliments. 3" all the way through btw.

I have a few videos, but they are on a friends facebook, so I don't know if you can see them or not.

http://www.facebook.com/#!/video/vid...ubj=1304580169
http://www.facebook.com/#!/video/vid...ubj=1304580169
Old 08-07-2010, 10:55 PM
  #13  
Staging Lane
 
sstz28's Avatar
 
Join Date: Jun 2003
Location: San Jose,Ca
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Default

i had 3in to 2.5 in wit magna flow bullets wit turdowns.wit hooker hearders they tuck in and sounded mean.i went with a magna flow catback since iam driving it around more and needed to quiet it down.
Old 08-08-2010, 02:19 AM
  #14  
TECH Senior Member
iTrader: (5)
 
TXZ28LS1's Avatar
 
Join Date: Mar 2004
Location: Classified
Posts: 6,164
Likes: 0
Received 1 Like on 1 Post

Default

im looking at ditching my magnaflow catback for a TD setup also. i am leaning towards the sweet thunders..
Old 08-08-2010, 05:38 AM
  #15  
TECH Addict
Thread Starter
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Default

ive found locally dynomax bullets and 3 chambers flowmaster i really dont know what to get yet.. and no facebook here i hate that thing .thanks guys keep them coming.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:22 PM.