FAST Install
#1
On The Tree
Thread Starter
Join Date: Nov 2005
Location: San Jose, CA/Phoenix, AZ
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
FAST Install
I installed a FAST 90/90 on my car a few weeks ago, and the SES light came on and its says i'm running lean in bank 1 & 2, but the SES light turns off for a day or 2 and comes back on, and also feels like i have a vacum leak, could this all be from me my routing my PVC system right??
#2
TECH Fanatic
iTrader: (63)
Join Date: Sep 2007
Location: IA
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
post some pics of the pcv. How does a vacuum leak feel? The easiest way to see if there is a vacuum leak is to spray a little carb cleaner around the edge of the intake and if your engine revs a little, there is your leak.
#5
On The Tree
Thread Starter
Join Date: Nov 2005
Location: San Jose, CA/Phoenix, AZ
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/11059703-post70.html
i kinda have like in the first pic setup, but with no PVC valve and the port on the back passnger valve cover is tapped in to the line that comes from the driver sider valve cover
i kinda have like in the first pic setup, but with no PVC valve and the port on the back passnger valve cover is tapped in to the line that comes from the driver sider valve cover