Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Wiring the Starter

Thread Tools
 
Search this Thread
 
Old 12-08-2010, 07:58 PM
  #1  
TECH Junkie
Thread Starter
iTrader: (19)
 
MetallicaMatt's Avatar
 
Join Date: Feb 2005
Location: Sandusky, Ohio
Posts: 3,155
Likes: 0
Received 0 Likes on 0 Posts

Default Wiring the Starter

Well my car has been apart for a good 6 months and I want to double check the wiring on the starter before I do it.

Anybody have a picture? 2 large posts and 1 small post on the solenoid if I remember correctly...
Old 12-08-2010, 09:05 PM
  #2  
TECH Veteran
iTrader: (14)
 
bayer-z28's Avatar
 
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes on 0 Posts

Default

Yep... Pretty simple.. Power in, power to starter, and a trigger. The starter or solenoid should ground thru the mounting surface.



OR

Old 12-09-2010, 05:11 AM
  #3  
TECH Junkie
Thread Starter
iTrader: (19)
 
MetallicaMatt's Avatar
 
Join Date: Feb 2005
Location: Sandusky, Ohio
Posts: 3,155
Likes: 0
Received 0 Likes on 0 Posts

Default

So just the 12v Switched (small wire), and the large positive. I don't remember a ground?

I'll look tonight...
Old 12-09-2010, 06:15 PM
  #4  
TECH Junkie
Thread Starter
iTrader: (19)
 
MetallicaMatt's Avatar
 
Join Date: Feb 2005
Location: Sandusky, Ohio
Posts: 3,155
Likes: 0
Received 0 Likes on 0 Posts

Default

There is a wire from the starter, Just stick that to the closest large post and the other large post is the hot from the battery. Small post is from the 12v switch?




All times are GMT -5. The time now is 05:50 AM.