96TurboLSX

iTrader: (2)

I need to get this setup on a 5.3 im boosting. Ive been looking all over for info on this setup but i dont see anything except pictures, no write ups. It looks like the stock low mount passenger side bracket on the ls1 out of camaro/firebirds that is just moved to the top of the motor? Plz help thanks!!

01transampower

iTrader: (9)

to me that does look like the stock ls1 bracket moved to the top. I ve had mine out and it looks jst like that. so im assuming thats all it is. the ls1 bracket moved to the top.

JaYZeig

iTrader: (11)

<<<---- would like to know too!

sjsingle1

iTrader: (1)

i dont think the LS1 bracket moved to the top would work........no?

96TurboLSX

iTrader: (2)

Do you know if the bolt holes in the front of the cylinder heads on ls1's are the same as 5.3 truck heads? Also does the f body alternator bracket use a rear brace, i dont see how one bolt can hold the alternator very steady.

01transampower

iTrader: (9)

It is actually only one bolt. Youd be surprised. Im not sure if bolt holes are the same though. It is an easy check though.

sjsingle1

iTrader: (1)

3 bolts hold the bracket on the F bod..........with a brace in the back

Paul Bell

iTrader: (9)

I think this will work for you:
http://www.speedinc.com/cont.cfm?cid=C0000801

96TurboLSX

iTrader: (2)

Ok thanks guys. That speedinc brackets looks real good, although i was trying to avoid spending $200. I can get the f body alternator bracket through gm for $14 but may have to go that route.

96TurboLSX

iTrader: (2)

Someones gotta know for sure about this