BlackBirds

iTrader: (24)

Today I noticed when I turned my ignition on my passenger's tail light was lit up, but my driver's wasn't. When I push the brake pedal both lights light up as normal, but when I release it the passenger's tail light stays lit up. Does this indicate a fuse is blown or something like that? This car is a project drag only car, so a lot of the wiring inside has been unplugged, does anyone know why one brake light would come on when the ignition is turned?

BlackBirds

iTrader: (24)

anyone know why the passenger's brake light would come on by itself when the ignition is on??

BlackBirds

iTrader: (24)

i also noticed when i step on the brake pedal with the ignition is off only the driver's side comes on

S10xGN

iTrader: (11)

You're prolly not getting an answer because the people who read here are expecting "gen III external engine" questions, not body wiring questions...

BlackBirds

iTrader: (24)

i didnt know where else to put the question. There isn't a "wiring" section that I could see

OldCobraGuy

iTrader: (2)

Sounds like a ground issue...feedback...problem.

BlackBirds

iTrader: (24)

problem solved, the connections at the brake pedal were loose and needed secured to the pedal better.

S10xGN

iTrader: (11)

Glad you found a fix!