Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Help with high Idle

Thread Tools
 
Search this Thread
 
Old 02-09-2012, 07:28 PM
  #1  
11 Second Club
Thread Starter
iTrader: (107)
 
tnmotown's Avatar
 
Join Date: Aug 2007
Location: Cali
Posts: 1,455
Received 22 Likes on 14 Posts

Default Help with high Idle

I'm having problems with my idle when the cars seems to warm up.

Here is the deal. On a cold start the engine with idle ok (around 600-700 rpms) until a few minutes then work its way up to 800-900rpms. Coolant is around 120* at this time. I then go around town and take the car for a spin. By this time the temp is at 185-190* which I figure is operating temp.

Now when I come to a stop sign, the idle will stay at around 3K rpm's!! I have to sit for about 20 seconds and then it will go down to 2K rpms, about 10 more seconds then it goes back down to normal idle. WHAT GIVES!?!?!

This is the motor thats in my '85 camaro and if it helps, it just has a flash tune from Mark Roman. ALSO, the idle set screw on the TB is about 3/4 all the way up because if I have it any lower, the car will not idle at all on cold start-ups.

Last edited by tnmotown; 02-10-2012 at 08:56 AM.
Old 02-10-2012, 08:11 AM
  #2  
TECH Senior Member
iTrader: (3)
 
Old Geezer's Avatar
 
Join Date: Jun 2004
Location: GA, USA
Posts: 5,640
Received 70 Likes on 62 Posts

Default

Try the tuning forum....




All times are GMT -5. The time now is 05:38 PM.