Question for Improved Racing re: Low Profile Oil Cooler Adapter
04-02-2012, 04:43 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Question for Improved Racing re: Low Profile Oil Cooler Adapter I have a question regarding the new Improved Racing Low Profile Oil Cooler Adapter
Regarding the 1/8" NPT ports on the front-lower and bottom edges of the part, which line is each ported to? Does the front-lower port to the "OUT" line, and the lower port to the "IN" line??
Thanks!
Mark.
Regarding the 1/8" NPT ports on the front-lower and bottom edges of the part, which line is each ported to? Does the front-lower port to the "OUT" line, and the lower port to the "IN" line??
Thanks!
Mark.
Last edited by Mark2002; 04-02-2012 at 04:49 PM.
04-03-2012, 04:52 PM
#2
LS1Tech Sponsor
I have a question regarding the new Improved Racing Low Profile Oil Cooler Adapter
Regarding the 1/8" NPT ports on the front-lower and bottom edges of the part, which line is each ported to? Does the front-lower port to the "OUT" line, and the lower port to the "IN" line??
Thanks!
Mark.
Regarding the 1/8" NPT ports on the front-lower and bottom edges of the part, which line is each ported to? Does the front-lower port to the "OUT" line, and the lower port to the "IN" line??
Thanks!
Mark.
We now have an instruction manual up, take a look at page 2: http://www.improvedracing.com/manuals/IR-EGM-1006.pdf
If you have any other questions, let us know.
Thanks!
Michael
Last edited by ImprovedRacing; 04-03-2012 at 10:22 PM.
08-02-2012, 03:36 PM
#4
LS1Tech Sponsor
It does not. We are working on one with a built-in thermostat, but it won't be as slim.
