Ported TB Question - LS1TECH

Log In 


Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories

Ported TB Question

Reply
 
Thread Tools Search this Thread
Old 04-20-2012, 07:51 AM   #1
Teching In
Thread Starter
iTrader: (1)
 
Whitefish's Avatar
 
Join Date: Mar 2012
Location: Central Ohio
Posts: 20
Default Ported TB Question

I promise I used the search feature, but I cannot find a "How to" on how to port a tb. Anyone have a link? Also, I was looking at the MAF porting write-up on Install U. Is this worthwhile? I only ask, because I see everyone talking about the benefits of the ported TB, but never heard anyone talking about porting their MAF. Thanks.
Whitefish is offline   Reply With Quote
Old 04-21-2012, 08:12 PM   #2
TECH Apprentice
 
JrodCamaro's Avatar
 
Join Date: May 2011
Location: Wichita, Kansas
Posts: 309
Default

Never heard of porting the MAF. De screening has been done alot. Porting it doesn't make sense to me, if you caught one of the pins in the middle you'd be screwed
JrodCamaro is offline   Reply With Quote
Old 04-21-2012, 09:57 PM   #3
On The Tree
iTrader: (1)
 
thegroup's Avatar
 
Join Date: Jun 2008
Location: Archie, MO
Posts: 196
Default

if i remember right, ws6store sells a new housing kit for it thats a little more open and gets rid of the middle support. PLUS SIDE, opened more to move air. MINUS SIDE, the sensor is more open if u happen to take the air filter out at the track. i never had a problem with it in the 3 yrs i had it
thegroup is offline   Reply With Quote
Old 04-21-2012, 09:58 PM   #4
On The Tree
iTrader: (1)
 
thegroup's Avatar
 
Join Date: Jun 2008
Location: Archie, MO
Posts: 196
Default

http://www.ws6project.com/user_stor/...rted-maf-ends/

heres the link to the halves
thegroup is offline   Reply With Quote
Old 04-22-2012, 07:07 AM   #5
TECH Fanatic
 
justin hover's Avatar
 
Join Date: Jan 2011
Location: Michigan
Posts: 1,359
Default

Porting the MAF ends is not worth it...don't touch the maf...Best bet is to send your TB out for porting... It's 40-75$ and it's done right.
justin hover is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 03:45 AM.