andy-lswon

iTrader: (1)

The foam piece under the intake, do I use the same thing when replacing the stock intake with a fast 90? If so what's the part # for it and where do I get it at

2win_SS

iTrader: (1)

Ws6Store... http://www.ws6project.com/user_stor/...oducts_id=4364

andy-lswon

iTrader: (1)

Does anyone just sell the foam by itself bc the intake I bought came with new gaskets

2win_SS

iTrader: (1)

Yes you can get them from the dealership... But I think they are more than what WS6 store sells the FelPro kit for... Just buy these... You will have extra gaskets plus you will be buying from our sponsors... Forget the Stealership.

andy-lswon

iTrader: (1)

That's what ill do then. Can't hurt to have some extras. So it is the same foam used on a fast then

2win_SS

iTrader: (1)

Yes. All these engines need that foam under the intake to reduce noise from the engine from what I've been told and read on this forum. Throw those under ther and you will be fine. Do u already have the LS6 coolant line and the button head bolts for the valley? You will also need to swap those. what year car do u have?

T76s10

iTrader: (6)

i got rid of it on mine, but, i also have ls6 block off's in the back so no lines are run under my intake.

garygnu

you don't need the foam.

badazz81z28

iTrader: (6)

I would imagine a crafts store or similar would have sticky back foam

2win_SS

iTrader: (1)

^^^ LS6 also come with the foam pads. I'm just telln him where to get them since he is lookn. I am one off those ppl who puts them in. GM did so I would

T76s10

iTrader: (6)

hmm didnt know that. i figured it was to isolate the coolant lines from touching the intake.

2win_SS

iTrader: (1)

It's reduces engine noise. And vibration to the knock sensors. They will read inaccurate and throw codes with vibrations... This is what I have read here on Tech from a few different threads. I have not experienced this 1st hand.

andy-lswon

iTrader: (1)

Yes 2win_ss, I already have the new coolant lines and the intake came with all new gaskets, bolts, valley cover bolts and tb bolts. I paid more than I wanted to for it but it came with everything new and its fully ported.

omarrakeen

iTrader: (2)

please go ahead and install them even if it would cost you some $$ it is better than doing the whole intake twice...ive been there once and will never go on without those pads. the noise was unbelievable...some had no noise without the pads. but i did TWICE. i got mine from ebay. they come with the gaskets too..you can even make your own.