smahlum_21

Trying to put in some new polys on my car. I have the drivers side in but can only get either the mount bolted to block or get the long bolt in on passenger side. The motor needs to actually come forward like 1/4in on that side so i can get the mount to clear the pedestal with the mount bolted to the block. Any tips or tricks any has used to get this done?

LS1121

iTrader: (17)

You should do a search, there is a Ton of stuff on this topic.
You can also start HERE https://ls1tech.com/forums/generatio...r-written.html

smahlum_21

i think ill take the 18mm bolt out of the drivers side and see if I can somehow get both sides to line up at the same time.