lnuxhakr

iTrader: (2)

Hello everyone,

I am currently saving my extra change for a future GMMG catback system. In the meantime I would like to add cutouts to my stock exhaust. I have two questions concerning this issue:

1. What average HP gain, if any, could I expect?

2. What is the best brand of cutouts?

Thanks in advance

Ryan02SS

iTrader: (3)

You really only need one cutout in your Intermediate Pipe before it goes over the axle. There is a perfect place for one there. As far as power gains look for 10+ rwhp over a stock Trans Am or Z28 Muffler. If your looking for an electric cutout I would go with QTP's QTEC. I have one and it works great as long as when closing it you don't hold the toggle longer than 4 seconds and overtorque the gears which then causes it to leak. If not electric our sponsors on the right hand side have all types of cutouts.

lnuxhakr

iTrader: (2)

thanks for your reply

Durien

the QTP QTEC is the way to go...

www.quicktimeperformance.com

M6HuggerSS

electric cut outs are BAD ***!!!!!! i love mine.

i even picked up 5 RWHP across the board with it opened....( thats good concidering thats like 0 backpressure ...LT + NO cats.)

Street Pro

I have your anwser --At Street Pro we have put a large number of F-body rides on the dyno--consistantly we see 14 to 18 HP gains with our cutout! Which is best? Check out our web site and then you tell me!

2_wacko

iTrader: (2)

I had mine home made and it worked out bad ***.

2ScoopsTa

i run a QTEC and i notice the difference in noise and GO