alexus6798

iTrader: (24)

What MAF are you guys running with a fast 90-92 setup? Any problems I may run into. I know I can go with an SD tune, but want to run the MAF for now.

alexus6798

iTrader: (24)

Anyone?

01ssreda4

iTrader: (96)

Forum isn't very active on Sundays. Gotta give it more then 1 1/2 hr for an answer. I'm personally running the stocker but I'm running SD.

alexus6798

iTrader: (24)

yeah, i noticed that.

raysadude

iTrader: (11)

85mm MAF, I have 102mm.

alexus6798

iTrader: (24)

^ Do you have a picture of your setup?

jrob56

iTrader: (39)

typically guys run a GM 85mm from what ive seen, and what i will be running eventually. fast toys 90 lid, 85mm maf, slp smoothbellow, new black fast 92.

alexus6798

iTrader: (24)

Yeah, I did some research. Trying to see if there are and cheaper options. I bought the 90/90 without thinking about the MAF and now Im going to have to spend a couple hundred more that I dont want to at this time.

dr_whigham

iTrader: (49)

I'm using the stocker with a SaxonPC MAF screen.

I do however have a custom 85mm I'm building that uses an LS3/7 Card MAF, but still with a Saxon screen in the front for good smooth readings. I plan on dyno testing it on the 12th

Sales4@Texas-Speed

iTrader: (4)

I would go SLP 85mm MAF for one of those cars. You don't have a ton of mods, I wouldn't expect you to need larger.

alexus6798

iTrader: (24)

^Just replied to Pm. I am about to have 1 7/8 headers installed soon and also have a custom EPS cam spec'd and going to acquire some 243's to send to Ai.

Mike Morris

iTrader: (55)

Similiar to my combo

Run a GM 85MM.....

alexus6798

iTrader: (24)

Yeah i researched on here and found a truck 85 on ebay and ordered the caspers adapter.

raysadude

iTrader: (11)

I have the pic somewhere in my old thread, I'll post it up here when I'm done with work.

INMY01TA

iTrader: (1)

FAST 90/90 here with stock maf, bellows, and lid.

trans_am7935

iTrader: (15)

i run a FTP 98mm lid, GM 85mm maf i got of a 03' Z06 and a fast 92/92 setup. i ran the SLP one before that and hated it. could never get the idle dialed in and high rpm pulls were unstable and erratic. do not get the SLP version.

there is nothing wrong with the stock maf though as i know a bunch of people that run H/C/I with stock maf.

alexus6798

iTrader: (24)

thanks for pic. The stock MAF worked?

alexus6798

iTrader: (24)

Yeah, I've heard nothing but negative about the SLP one.

alexus6798

iTrader: (24)

I assumed with the bigger inlet that I would need a bigger MAF...

dr_whigham

iTrader: (49)

Remember the SLP 85mm MAF has a resistor soldered inline that allows it to be plug and play, no tuning required, to work. That's why they are pretty much untunable.

Here's my 92/92 combo with a stock MAF