100mm maf question
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
100mm maf question
hate to ask a stupid question but would it be ok to run my normal 3'' piping have a step up, to a 100mm tsp maf with the screen then step down to the size of my TB.
I am trying to get away from running a SD tune for my boost build. I would rather not have to buy a intake and TB.
thanks for any help or advice that can be shared.
I am trying to get away from running a SD tune for my boost build. I would rather not have to buy a intake and TB.
thanks for any help or advice that can be shared.
#4
Teching In
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I have a stock TB, I am planning to go with a MAF tune for my boosted build. My tuner said to go with the 100mm MAF for tsp. He said it would do the job I did a little reading and saw that a screen was needed for ease of tuning along with a connector to plug it in. If I am missing anything please let me know. I have a stock TB with ls6 intake, I might go to a bigger TB later but not at the moment.
#6
TECH Veteran
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
IMO, I don't see a point in going from 3" to 4" then back to 3" again. Just run a ZO6 MAF for a stock size TB. That 100mm MAF is a lot bigger than you think. The 102TB too for that matter. And if your tuner has issues with the ZO6 MAF, he needs to revisit the book of "scaling exercises."
Last edited by bayer-z28; 10-30-2012 at 08:41 PM.