97camaroguy

iTrader: (5)

So I dropped in a granatelli fuel pump in my fbody that I bought off summit: http://www.summitracing.com/parts/grn-gm722-2

I'm also running a fuel filter with a built in regulator that looks just like this
http://www.swaptastic.net/ls1_miata/...20(Custom).JPG

my question is what should my fuel pressure at the rail be?

I installed a gauge that sits on the rail but everytime I prime the system it reads past 100psi. Now I'm hoping this is a faulty gauge because the corvette regulator should be keeping that pressure at 58lbs no? Does the location of the regulator/filter matter because it is located close to the back of the car in my application. Someone give me some helpful feedback.

S10xGN

iTrader: (11)

Verify gauge is good, verify lines are installed correctly (in/out) on the filter unit, check lines aren't plugged or internally damaged, and check tank return fitting for pluggage.

97camaroguy

iTrader: (5)

Ok...