aaronware76

iTrader: (2)

Hey guys, other than tony mamo, what's the best shop to send my new fast 92 to for a port job? There's no way I'm paying someone $500 to port my intake but at the same time I feel like it would be foolish not to have it ported before I put it on since I'm trying to get all I can out of my combo. Peak speed? Vengeance? Can anybody give me some guidance. I won't spend more than $250 to get it done.

Knight-Z06

i went with vengence on my fast 102, but for the best possible job its going to be tony mamo

aaronware76

iTrader: (2)

Do you feel vengeance did a good job for the money? What'd they charge ya?

Blackpanther99

iTrader: (8)

I wouldnt be surprised TSP ports them also.

SMOKNSS

iTrader: (3)

Off the top of my head I can't think of anyone that ports them for $250. Usually going to be around the $500-$700 range.

IIRC, it seems like the last time I talked to Ron@ Vengeance he said that they didn't port them unless you buy it from them. I may be wrong though.

aaronware76

iTrader: (2)

Has anyone had Baer essentials racing or peak speed shop port a fast for them and had great results?

David@Vengeance

iTrader: (2)

We port intakes that are shipped to us all the time! We charge $275 for our porting services! Shoot me a PM if interested!

aaronware76

iTrader: (2)

Pm sent Ryan. Thanks

aaronware76

iTrader: (2)

Has anyone dealt with either of the two shops above for porting?

Blk98Vert

iTrader: (2)

I haven't seen Peaks work, so I can't judge. I have seen a Vengeance 102 side by side with a stock 102, far from impressed. I would go with Mamo

peakspeedshop

iTrader: (7)

We would be glad to port your FAST 92 for you. We charge $250 plus return shipping (generally $20-25 to most US locations). For those who aren't familiar with our work, here are a few pics of a FAST 102 (process and cost is the same).







Porting intakes is our primary business and we have a good reputation for quality work.

Here are comments from a few customers:
“I got my intake yesterday and it looks great. You did a great job on the runners and inlet of the intake. Thanks Bob!”
James - Upland, CA (FAST 92 Intake Manifold ported)

“Sorry not to reply sooner … and tell you how awesome it all turned out....you did a fantastic job!!!”
Jim - Piedmont, OK (Ported FAST 92 Intake Manifold, and throttle body; Powder coated Intake Manifold and fuel rails Mirror Red; Painted Throttle Body Gloss Black)

"I purchased a ported 102 intake from Peak performance. They have flawless customer service that made the install very smooth. They are competitively priced and shipping is quick. This is a super bolt on mod that really wakes up the LS2 motor. It isn't a bad idea to send them your throttle body to port when you have everything apart. "
Carl- Williamsport, PA (FAST102 ported and Throttle Body ported for LS2)

“Just got my ported 102 on my car this weekend. Wow can definitely feel a power increase. Great work Peak Speed! And thanks for the fast turn around.”
Cory – Osceola, WI (FAST102 and LS2 throttle body ported)

To order, you can call us at 719-651-1952 or go to our online store at: http://peakspeedshop.com/Zen_Cart/

5w20

iTrader: (21)

whats up with that blurred line?

Blackpanther99

iTrader: (8)

Ive been looking through Peaks Speed Shop porting work and they do a good job!

Chaos07

Peak speed did my fast 92. Fast shipping n it was an awesome job.

slowlsx

iTrader: (28)

How Much power is be be made by porting a fast 92?

aaronware76

iTrader: (2)

Peak speed says 8-10 rwhp I believe. I think that's the way I'm gonna go. Nothin negative seen or heard about them so far. It just hurts spending another $275 with shipping after spending over a grand on the intake and a nw tb. But, I'm going for max effort so gotta pay to play I guess.

BrntWS6

iTrader: (7)

Patience and a day in your garage with a dremel. I had never done it and mine turned out great. I even port matched it to my heads which was a bit harder but since it was already off why not. It's not hard at all just a bit time consuming.

aaronware76

iTrader: (2)

I just zoomed in on the intake port pic and your right, they put a blurred line in there that you only see if you expand the picture. That's right where the ridge is from the factory. My initial thought was that, that ridge was removed during their porting process. I'm guessing now that it isn't removed? What's up? You guys that have ported them yourselves, do you guys remove that ridge completely?

bene

iTrader: (16)

Looks photoshop.

aaronware76

iTrader: (2)

Sure does to me also. Peak speed, any comments? What's up with that? Do you guys remove that ridge from the factory? Why's the blurred line in the picture right where that ridge is?