WS6_Veteran

iTrader: (6)

So, although I know it rarely helped on air gains I built a home made JAAM kit for a whopping cost of $9.24. Pick up a 12x24 22GA piece of sheet metal from lowes. Made a card board cut out and transferred it to the metal. Took a little skill work with an angle grinder and dremel but I got the majority done today. Going to clean it up and grind down the rough edges and paint it either silver or black in the up coming week. I am thinking about trimming the sides down a bit more because they don't match since the intake is actually offset a little bit. I also cut the back half off the lower intake and the plastic skirt on top of the ac radiator. Anyhow here's some pictures. I know, like I said still got some finishing work on the metal.