JSlayman22

iTrader: (2)

Well im doing my first total build on a ls style car an 02 z28, well while taking the intake off i didnt see the electronic plug in the back of it. And pulled the wires right out of the plug.. I can get them back in the plug but i need to know how they go.. the is a green a black and a gray...

jrpimp00

iTrader: (17)

Can you post a pic of the plug and or what it plugs into

JSlayman22

iTrader: (2)

This is the piece still plugged into the back of the intake...

omarrakeen

iTrader: (2)

did you pull this yourself? looks like the MAP wires are pulled out of its connector.

patroick67

iTrader: (1)

It's your lucky day, I have the intake off my car let me go look for you

patroick67

iTrader: (1)

Green wire will be on the left black wire on the right. My car is the exact same as yours good luck

JSlayman22

iTrader: (2)

Thanks a million!!! and yes I pulled it myself... First time pulling a LS.. Wont make that mistake again haha

patroick67

iTrader: (1)

No prob anytime

yukonblu

What kind of intake are u replacing it with?? And thanks for doing that, i would have probably done the same thing lol.

z28SSilvest

OP, the black wire is ground. How many miles does the car have one it? & those harnesses are just twist and pull.. Just like the headlights

JSlayman22

iTrader: (2)

I am leaving the stock LS6 intake the motor that was in it blew up so i pulled it and built another. It was actually much easier than i thought it was gonna be.. Used a paper clip to take the plug apart lol than a pair of wire cutters to re crimp took about 10 minutes of work.. and to think all that crying I did prior ha

JSlayman22

iTrader: (2)

Would any of you guys know how to do away with the egr/air return that goes from the intake lid to the back of the intake into that canister than back into the headers?