Covering my bases on h/c needs
04-15-2015, 09:07 AM
#1
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Jan 2012
Location: GA/SC
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Covering my bases on h/c needs Just trying to make sure I get everything I need for supporting the H/C swap.
Here is what I have now:
Fully Forged internals 347 cu
Stock injectors
LS6 intake
243 heads
LT's 1 3/4 primaries and bullets
Ported stock TB , stock MAF, Racetronix pump, stock fuel rails
It's a nitrous motor running a 200 wet shot.
New heads will be the PRC 225's milled .060" cam will be 233/239 .630/622 113+2 .
So will I need to upgrade my injectors?
What other options are out there for intakes as well besides the Fast intakes?
Here is what I have now:
Fully Forged internals 347 cu
Stock injectors
LS6 intake
243 heads
LT's 1 3/4 primaries and bullets
Ported stock TB , stock MAF, Racetronix pump, stock fuel rails
It's a nitrous motor running a 200 wet shot.
New heads will be the PRC 225's milled .060" cam will be 233/239 .630/622 113+2 .
So will I need to upgrade my injectors?
What other options are out there for intakes as well besides the Fast intakes?
Last edited by MFJ; 04-15-2015 at 09:20 AM.
