LS6 Vette Intake into F body Pic walkthru
#1
LS6 Vette Intake into F body Pic walkthru
Heres a quick walk thru for anyone swapping a Vette intake into an F body, main diffrence from the Jim X install is the A/C vent will need a new vaccum location since the Vette intake doesnt include a fitting in the rear of the intake. If you have any questions feel free to ask, thought it might come in handy in the future to someone else. One more thing to add, I deleted EGR and have no codes yet kinda odd considering what everyone usually says. Enjoy.
Last edited by 2000Z28M6; 06-03-2004 at 09:52 PM.
#4
On The Tree
iTrader: (-1)
Join Date: Feb 2004
Location: Winnipeg
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by felton316
Are you sure the Vette intake doesn't have the vacuum port in the rear? Mine did.
#6
I tried looking for a casting number, but since it was painted, it has been sanded down. The only difference between the vette and f-body LS6 intakes, should be the brass threaded fitting for the throttle cables (vettes don't have it due to drive-by-wire).
Trending Topics
#10
It's not mine! woo hoo!
iTrader: (7)
Originally Posted by 2000Z28M6
Some people have said it might be an SLP LS6 intake. So at this point I'm still not 100% what type it is????? This is the # on the intake 12573572. Some one identify it please........