Noob Springs/pushrod Question
#1
Teching In
Thread Starter
Join Date: Jun 2014
Location: Enid, OK
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Noob Springs/pushrod Question
I currently have a set of 241 heads and ls6 intake on a new 408 build, about to start the process of swapping to 823 heads and fast 102 intake. Can i just swap the existing set of dual spring from the 241s to the 823s? also will the 7.4" push rods work as well? heads have not been milled. Thanks in advance for all the help.