Question about GM accessorie kit and single turbo
06-12-2015, 04:28 PM
#1
Teching In
Thread Starter
Join Date: Nov 2013
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Question about GM accessorie kit and single turbo Greetings.
Doing a turbo 6.0 swap into a 55 (2nd) series chevy truck with a c4 front end.
To make thing easy and not have to chase parts I want to use one of the GM accessory kits without AC (either the cts, or corvette one probably). Although read somewhere that they might not bolt right up to the iron block?
Plan is to put a gt45 on the passenger side. Any reason to go with one over the other when it comes to plumbing it up?
Finally, do the common up and forward sets (headers) that are available work with them?
Any other info would be appreciated.
Link to accessories -
http://www.jegs.com/p/Chevrolet-Perf...06347/10002/-1
Doing a turbo 6.0 swap into a 55 (2nd) series chevy truck with a c4 front end.
To make thing easy and not have to chase parts I want to use one of the GM accessory kits without AC (either the cts, or corvette one probably). Although read somewhere that they might not bolt right up to the iron block?
Plan is to put a gt45 on the passenger side. Any reason to go with one over the other when it comes to plumbing it up?
Finally, do the common up and forward sets (headers) that are available work with them?
Any other info would be appreciated.
Link to accessories -
http://www.jegs.com/p/Chevrolet-Perf...06347/10002/-1
