v8maro

iTrader: (4)

I dunno if it's the lid or my K&N, but I always have crap on my MAF screen, is there some kind of foam ring I can put around the perimeter of the lid so I don't get the crap like grass and small pebbles?
thanks
-Steve

CamaroCain

iTrader: (1)

I have never had a problem with my TSP lid and I've had it on the car for over a year.

Benjamin Russick

iTrader: (1)

I had the same problem with junk up in my MAF until I ditched my K&N and went back to a Fram. Problem solved...

Fulton 1

iTrader: (9)

Your K&N panel filter should have come (at least they used to) with a foam gasket that gets applied to your air lid. If it didn't then you can either call K&N and request a new one or get some weatherstripping foam from Home Depot and attach it around the inner periphery of your lid so that it seals against the filter.

98Blubrd

iTrader: (13)

when i bought my car it didnt have this little piece that holds in the air filter properly. I went to the dealer and got the piece and have had no problem ever since. Without the piece you can clearly tell the air filter doesnt fit properly.

demonspeed

iTrader: (7)

You need that foam liner. It comes with the K&N filter.

Ferocity02

iTrader: (60)

I have the K&N filter and TSP lid w/o the foam liner. I saw that there was a huge gap between the filter and lid so used a bead of RTV on thr filter and let it dry before installing the lid back on, problem solved.

smokin' joe 00 ss

Yea I ditched my K&N filter too because of quality and went with the Holley Power Shot and it's a great quality filter.