VMS Performance Coils - LS1
12-25-2016, 08:46 PM
#1
Teching In
Thread Starter
Join Date: Dec 2014
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
VMS Performance Coils - LS1 Hey guys,
So I have been doing a lot of research. I have read a lot that MSD's are a waste of money. I was going to go with AC Delco but I saw VMS performance high output coils for a similar price. The link is below. I have read about other brands but not this one, any reviews?
Thanks,
Link:
Non-Sponsor Soliciting Policy
So I have been doing a lot of research. I have read a lot that MSD's are a waste of money. I was going to go with AC Delco but I saw VMS performance high output coils for a similar price. The link is below. I have read about other brands but not this one, any reviews?
Thanks,
Link:
Non-Sponsor Soliciting Policy
Last edited by KCS; 12-27-2016 at 07:10 AM.
12-25-2016, 09:30 PM
#2
TECH Junkie
Nothing but ac delco. They are PROVEN performers that can handle 1000 hp, last many many miles, and give off little to no "noise"
A switch in coils will yield little to no gain. Anybody that says it gives noticeable gains is either drinking the Kool aid, or telling you things because they're trying to sell them.
Looking for horsepower in coils is like buying snake oil
A switch in coils will yield little to no gain. Anybody that says it gives noticeable gains is either drinking the Kool aid, or telling you things because they're trying to sell them.
Looking for horsepower in coils is like buying snake oil
12-25-2016, 10:15 PM
#3
Teching In
Thread Starter
Join Date: Dec 2014
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Nothing but ac delco. They are PROVEN performers that can handle 1000 hp, last many many miles, and give off little to no "noise"
A switch in coils will yield little to no gain. Anybody that says it gives noticeable gains is either drinking the Kool aid, or telling you things because they're trying to sell them.
Looking for horsepower in coils is like buying snake oil
A switch in coils will yield little to no gain. Anybody that says it gives noticeable gains is either drinking the Kool aid, or telling you things because they're trying to sell them.
Looking for horsepower in coils is like buying snake oil
12-26-2016, 05:35 PM
#4
FormerVendor
iTrader: (1)
Join Date: Nov 2008
Location: Santa Ana, CA. USA
Posts: 2,157
Likes: 0
Received 16 Likes
on
16 Posts
LS IGN-1A hp gain for NA LS = 18 The ignition coil IS rated in output energy, the term is mj's of energy.
The difference in housing color, Red, Yellow, Black will make NO HP change.
The CAUSE, in increased HP, is that a higher energy ignition coil has greater Arc Duration, I great thing for an engine.
The coils supplied to Delphi ARE great coils @ 36-64 mj.
They are then sold to AC-Delco (Dayton Engineering Laboratory COmpany) for "aftermarket" replacements.
There ARE counterfits at E-Bay, listed.
I thank 'Maroned" for his respect of our coil.
VMS doesn't manufacture coils, they are supplied.
My observation of the "steel" Black paint, the Red housing quality, AND epoxy color would make me want to test one of them in my CO-2 coil pressure test chamber before fitting.
You could send me one to test, no "charge".
I could supply reasons based on "science" as the the HP GAIN, just ask ?
Lance
The difference in housing color, Red, Yellow, Black will make NO HP change.
The CAUSE, in increased HP, is that a higher energy ignition coil has greater Arc Duration, I great thing for an engine.
The coils supplied to Delphi ARE great coils @ 36-64 mj.
They are then sold to AC-Delco (Dayton Engineering Laboratory COmpany) for "aftermarket" replacements.
There ARE counterfits at E-Bay, listed.
I thank 'Maroned" for his respect of our coil.
VMS doesn't manufacture coils, they are supplied.
My observation of the "steel" Black paint, the Red housing quality, AND epoxy color would make me want to test one of them in my CO-2 coil pressure test chamber before fitting.
You could send me one to test, no "charge".
I could supply reasons based on "science" as the the HP GAIN, just ask ?
Lance
12-26-2016, 07:43 PM
#6
Teching In
Thread Starter
Join Date: Dec 2014
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
The ignition coil IS rated in output energy, the term is mj's of energy.
The difference in housing color, Red, Yellow, Black will make NO HP change.
The CAUSE, in increased HP, is that a higher energy ignition coil has greater Arc Duration, I great thing for an engine.
The coils supplied to Delphi ARE great coils @ 36-64 mj.
They are then sold to AC-Delco (Dayton Engineering Laboratory COmpany) for "aftermarket" replacements.
There ARE counterfits at E-Bay, listed.
I thank 'Maroned" for his respect of our coil.
VMS doesn't manufacture coils, they are supplied.
My observation of the "steel" Black paint, the Red housing quality, AND epoxy color would make me want to test one of them in my CO-2 coil pressure test chamber before fitting.
You could send me one to test, no "charge".
I could supply reasons based on "science" as the the HP GAIN, just ask ?
Lance
The difference in housing color, Red, Yellow, Black will make NO HP change.
The CAUSE, in increased HP, is that a higher energy ignition coil has greater Arc Duration, I great thing for an engine.
The coils supplied to Delphi ARE great coils @ 36-64 mj.
They are then sold to AC-Delco (Dayton Engineering Laboratory COmpany) for "aftermarket" replacements.
There ARE counterfits at E-Bay, listed.
I thank 'Maroned" for his respect of our coil.
VMS doesn't manufacture coils, they are supplied.
My observation of the "steel" Black paint, the Red housing quality, AND epoxy color would make me want to test one of them in my CO-2 coil pressure test chamber before fitting.
You could send me one to test, no "charge".
I could supply reasons based on "science" as the the HP GAIN, just ask ?
Lance
I have to look into them. Thanks
