Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Misfire Still

Thread Tools
 
Search this Thread
 
Old 11-25-2004, 07:24 PM
  #1  
12 Second Club
Thread Starter
iTrader: (1)
 
hardtopSS's Avatar
 
Join Date: Nov 2004
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default Misfire Still

alright, i already put up a post about this, #6 miss still. A couple questions? is there a way to test these coils other than the standard oldschool screwdriver test? also, will standard plug wires work on these coil packs? DIY wires are so much cheaper that the custom fits. thanks for the input. changed all the plugs agian yesterday, so thats not it. hit me back, tom
Old 11-25-2004, 07:44 PM
  #2  
TECH Addict
iTrader: (13)
 
Z28Venom's Avatar
 
Join Date: Jan 2004
Location: USN, Haze Grey and Underway
Posts: 2,900
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by hardtopSS
alright, i already put up a post about this, #6 miss still. A couple questions? is there a way to test these coils other than the standard oldschool screwdriver test? also, will standard plug wires work on these coil packs? DIY wires are so much cheaper that the custom fits. thanks for the input. changed all the plugs agian yesterday, so thats not it. hit me back, tom
A good way to test your coil pack is to move it.. Swap the pack to a different cylinder and see if the miss follows it.




All times are GMT -5. The time now is 12:17 PM.