Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Catouts man they are pain in the ass !

Thread Tools
 
Search this Thread
 
Old 12-25-2004, 06:47 PM
  #1  
On The Tree
Thread Starter
 
FiveSevenEagle's Avatar
 
Join Date: Oct 2004
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default Catouts man they are pain in the *** !

simply and sadly i couldnt fit the left side ( driverside) with a cutout !!
the space is narrow and the pipe is flat , i want to plug it just after the LTs !
the passenger side is ok but the driver side was NOT OK . i just installed LT headers with cutback and an electronic cutout . what happened is i plugged the cutback and i took the car for a cruise but i was hiiting every single **** bulging from the road because of the driver side .. i came back 2 home and i replaced the driver side with stock flat exhaust tube !!! what can i do ! and after one week ive recieved the DMH cutout and it was the surprise again THE DRIVER SIDE .. finally i installed one of the cutouts after the Y pipe and the otherone in the closet !! LOSER thats what am feeling .. HElp HELp
one more thing .. my car is lowered 1.5 inch .
opinions and solutions please !
Old 12-25-2004, 07:25 PM
  #2  
10 Second Club
iTrader: (16)
 
LS1LT1's Avatar
 
Join Date: Nov 2001
Posts: 9,331
Received 0 Likes on 0 Posts

Default

Call Barry over at QTP (www.quicktimeperformance.com) and see if maybe he has any suggestions.




All times are GMT -5. The time now is 03:34 PM.