borisshnitkin

i havent even had it for more than a month and its already not working. i dont know whats going on, you can hear the motor but the the plate itself doesnt move. i was going to call qtp tomorrow and see what they say. has anyone here have a problem like me before?????

Ferocity02

iTrader: (60)

The set screws that hold the shaft to the motor may have come loose or fallen out.

Red99TA

iTrader: (11)

This happened to mine after about 4 months. You could hear the motor working but the blade wasn't turning. Just take it off and tighten up all the screws...sounds like that's the problem.

Quick Time

iTrader: (1)

Do not take it apart. Give us a call. That is why we have a warranty on them.

borisshnitkin

thanks alot guys. i called qtp and they said to stop by. great customer service!!!!!

Ferocity02

iTrader: (60)

I e-mailed QTP about one of mine coming loose and they gave me crap about not having enough clearence, even though there is a good 1" on all sides. Both are still loose and I'm hoping they don't fall apart.

Durien

the egine often moves around...the headers are attached to the engine and so is the whole exhaust system..1" might not be enough to clear those movements on the QTEC

Ryan02SS

iTrader: (3)

Mine blew apart on the interstate a while back. The screws holding the motor onto the assembly worked their way out and I lost all the gears inside. The QTEC is useless now without rebuilding. Called QTP and they did not mention a warranty and wanted $30 to fix it.

CRL 01 SS

iTrader: (4)

LOL...my QTEC did the same thing. I was going down the interstate and I heard the parts slingin out and hitting the floorpan.

Ferocity02

iTrader: (60)

As I said, there is plenty of clearence, the pipe doesn't even move 1/2" when under load. One side goes down, away from hitting anything and there are no sings of hitting on the other.

LS1LT1

iTrader: (16)

Mine's been working flawlessly, I love my QTP QTEC.