Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Wierd Problem, What causes this?

Thread Tools
 
Search this Thread
 
Old 06-08-2005, 09:04 PM
  #1  
Teching In
Thread Starter
 
alivegy's Avatar
 
Join Date: Nov 2002
Location: SoCal
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Question Wierd Problem, What causes this?

Everyday when I leave work in my 02 z28 m6 I have the same problem, and only at this one spot. Leaving my parking lot and going into the culdesac, the parking lot is a little higher than the street so for about 5 feet your drive down at an angle. Not overly steep, but steep enough that i have to go slowly so not to scrape the front end.

Now after I have gone down and all for wheels are on the flat street. I ease the clutch out and hit the gas to drive off. But every day the car stutters. It accelerates in waves. It last for a good 1 1/2 to 2 seconds. Its the strangest thing. Sorry for the long read but any have an idea what would cause this? My car is only under warrenty for the next few days.

Thanks people,
Ryan
Old 06-09-2005, 03:06 PM
  #2  
Teching In
Thread Starter
 
alivegy's Avatar
 
Join Date: Nov 2002
Location: SoCal
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default

No one has any idea? My warrenty literaly expires tommorow.
Old 06-09-2005, 03:18 PM
  #3  
TECH Apprentice
iTrader: (7)
 
sandking's Avatar
 
Join Date: Mar 2005
Location: Rancho Cucamonga, Ca
Posts: 358
Likes: 0
Received 0 Likes on 0 Posts

Default

Maybe you need to resurface the flywheel?
Old 06-09-2005, 03:44 PM
  #4  
TECH Fanatic
iTrader: (2)
 
daryl2cb@yahoo.com's Avatar
 
Join Date: Jul 2004
Location: Greensburg,PA
Posts: 1,882
Likes: 0
Received 0 Likes on 0 Posts
Default

do you let the car warm up alittle, of jump in and go? I never had that problem, but I never move mine untill water temp is around 150- 160 first notch on the temp guage.
Old 06-09-2005, 03:49 PM
  #5  
Teching In
Thread Starter
 
alivegy's Avatar
 
Join Date: Nov 2002
Location: SoCal
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default

I usually let it sit for at least a minute before going anywhere, usually longer. Thanks for your replies guys.




All times are GMT -5. The time now is 03:41 PM.