bellow for 90mm tb to 85mm maf?
08-30-2005, 01:15 PM
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2003
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
bellow for 90mm tb to 85mm maf? i have a 85mm lid and maf so there is no coupling in between, so the distance between the maf and the tb is bigger than normal bellows seem to allow for. any ideas? what can i use.
08-30-2005, 01:45 PM
#2
Stock bellows will work fine.
Or you can use this:
http://shop.airflowonline.com/Mercha...tegory_Code=HH
Or you can use this:
http://shop.airflowonline.com/Mercha...tegory_Code=HH
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
08-30-2005, 02:11 PM
#3
Launching!
iTrader: (2)
Join Date: Dec 2002
Location: Mooresville, NC
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Patrick G
Stock bellows will work fine.
Or you can use this:
http://shop.airflowonline.com/Mercha...tegory_Code=HH
Or you can use this:
http://shop.airflowonline.com/Mercha...tegory_Code=HH
Nick
