zrater

what muff can i replace the stock one with , but still stick with my stock tips.
2002 z28 stripper. thanks

monsterbreather

iTrader: (1)

im doing the flowmaster 80 series.needs to be welded in though.
this weekends project.

monsterbreather

iTrader: (1)

ok theres alot of welding involved.mine turned out great but i did it at my shop.again the muffler isnt a direct fit as claimed. part number and discription flowmaster 80 Series Crossflow Muffler, 2.50" IN (O) / OUT (D) 42583 requires a few adaptors as its about 10 inches shorter. its possible but will again take some welding and patience and skill if using the existing pieces. hope this helps someone.

Tom's_03SVT

99% of them....

Cstick

Hooker aerochamber. The muffler is a little shorter so you need to get like a 6" exention for the left tail pipe.