99whitews6

iTrader: (2)

My intake will consist of a 85mm lid going right to the 90mm TB. How you you guys connecting the two? If there is an off the shelf part. Please post or PM me a link!

-not really interested in the Fernco or anything like that (if it is even long enough).

bshell

iTrader: (24)

Take a look at this link: https://ls1tech.com/forums/generation-iii-external-engine/396161-photos-mafless-bellows.html
Lots of good info for you.

MeentSS02

iTrader: (11)

I still have my 85mm MAF in place even though I'm not using its readings simply because the IAT sensor is imbedded in it.

BLUE99T/A

iTrader: (2)

I just got a second maf from a friend, ported it and stuck it in place til I get some good ideas on a permanent fix.

99whitews6

iTrader: (2)

I dont have an 85mm MAF, dont plan to get one, and I am not sticking the stock maf in there. Looks like I will be using the LINK above to get me going!

THanks guys!

MeentSS02

iTrader: (11)

Sounds like a good plan for you. Let us know how it turns out.