Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Pacesetter O2 Question

Thread Tools
 
Search this Thread
 
Old 04-22-2006, 01:48 PM
  #1  
Teching In
Thread Starter
 
hosmmark's Avatar
 
Join Date: Dec 2003
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Pacesetter O2 Question

Ok, just got done installing the LT's. Now I took out 4 O2 sensors but I only have holes for 2. WTF now?
Old 04-22-2006, 02:03 PM
  #2  
Teching In
 
HOOVERZ28's Avatar
 
Join Date: Feb 2006
Location: Tyler, Texas
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

You have to tap into the exhaust behind the cats for the rear 02's if you keep your cats. If not, then just get sims.
Old 04-22-2006, 04:48 PM
  #3  
TECH Resident
iTrader: (21)
 
camaroguy26's Avatar
 
Join Date: Sep 2005
Location: New Jersey
Posts: 820
Likes: 0
Received 0 Likes on 0 Posts
Default

I was lead to believe with long tubes your rear o2 sensors will throw a code, no matter if you have a cat or not. I know with my mid-lengths I have now it throws codes most of the time with the stock cats in place.

Your best option is to just pick up some o2 sims from someone on this site, about 50 or 60 bucks plus shipping, or get your PCM tuned and have the rear sensors removed. I suggest the tuning so you can pick up a few extra ponies with the extra tweeks at the same time. I've never had it tuned before but I've heard the lowest start at 150 bucks unless you can find someone near you that can do it for free.




All times are GMT -5. The time now is 10:01 AM.