Who makes 90mm Black & Clear Lids
#7
That's what she said...
iTrader: (8)
Here's an interesting thread. It seems the LG lid is pretty big too. It's worth a shot!
https://ls1tech.com/forums/generation-iii-external-engine/488576-first-mod-lg-lid-installed-s.html
https://ls1tech.com/forums/generation-iii-external-engine/488576-first-mod-lg-lid-installed-s.html
Trending Topics
#8
TECH Fanatic
iTrader: (12)
Actually... I just went out and looked at my old cracked whisper lid and my new MTI lid. They both measured just shy of 3-5/8" inner diameter where the MAF slides into... which is right at 92mm.
I'm really thinking that the 85mm lid is only necessary when using an 85mm MAF as the OD of the MAF is going to be larger than the stocker.
I believe I will just get a smooth bellows to run straight from the lid to the throttle body and call it a day. (Speed Density tune)
I'm really thinking that the 85mm lid is only necessary when using an 85mm MAF as the OD of the MAF is going to be larger than the stocker.
I believe I will just get a smooth bellows to run straight from the lid to the throttle body and call it a day. (Speed Density tune)