erikthegoalie

iTrader: (29)

i got a FAST 90 and a NW 90 combo on the way...what smooth bellow do I need to fit the 90mm TB...
THANKS!

orangeapeel

iTrader: (18)

fernco mod will probably work in this case.

Lithium

iTrader: (47)

yup yup.

TheBlurLS1

iTrader: (8)

Stock bellow, you gotta talk dirty to it, but it WILL fit.

You won't even need the damn hoseclamp once its on!

erikthegoalie

iTrader: (29)

haha ok....i actually have the FERNCO already so I will try that....ill just grind some on the inside, clean it up and lub it a lil then try to get it on...

THANKS!

2000blackta

iTrader: (16)

I had the SLP one already on the car, so I just stuck with that. Works fine for me.

ty_ty13

iTrader: (42)

use a blow dryer to heat it up and stretch

CRL 01 SS

iTrader: (4)

Me too. The SLP bellow fits good after I trimmed a little off the ends.

erikthegoalie

iTrader: (29)

cool thanks guys!!!

TheBlurLS1

iTrader: (8)

I think I have a new sig.....

xaon

iTrader: (12)

That takes too long. Stick that dude in the microwave!

TheBlurLS1

iTrader: (8)

Pot of boiling water works too.

And when you get done, you can cook some ramen noodles and celebrate!

erikthegoalie

iTrader: (29)

hahahah thats ****** hilarious!! i didnt even notice that

KRAZY K 2000 TA

iTrader: (5)

not meaning to steal post but i need to know what hose to use for no MAF on the 90/90,by the way the 4 inch fernco is to big??why the NW90mm is 4 inchs and the 3 inch fernco fits with lube but i dont like it it tapers down tremendously,but they are both to short to go to my airbox lid with no MAF what tubing do i use now?any ideas

TheBlurLS1

iTrader: (8)

https://ls1tech.com/forums/generation-iii-external-engine/508707-sd-people-talk-me.html

This was a few posts down. It has tons of stuff.

erikthegoalie

iTrader: (29)

thanks!