bikemanx2

iTrader: (1)

I finally got some pics and video of my new exhaust up. Its Pacesetter LT's with 3" td's with an H-pipe, Magnaflow(Carsound) cats and 20" long powersticks, under the axle.

Cold Start Video
Warm idle and rev video

Charlie@LsXperts

iTrader: (12)

hmmm.........

Jason482

iTrader: (1)

And still 6" of ground clearance? Or is that an optical delusion?

one2run

iTrader: (5)

sounds good! i love my duals piped out back, but i do not have cats. your exhaust sounds good with them in...
what was the cost for the system?

TheBlurLS1

iTrader: (8)

Fabb'd duals come out nice if someone competent is doing it. Mine have nice ground clearance, and they are 3" under the axle.

SmokeySS

iTrader: (7)

I like the way it sounds. I want to do the same thing in a few months so now I have a good idea on how it will sound with the stock cam. Are powersticks made by Magna as well?

I would also like to know what the cost was out of curiosity.

bikemanx2

iTrader: (1)

I love the way it sounds. its actually rather quiet up until about half throttle and 3k rpm, then it really gets loud. Its nice cuz I can drive it around and not stand out with a ridiculously loud system, unless I want to. No drone whatsoever inside the car either. Including the headers it cost me somewhere around $1200 and I still don't have tips on it. I'm still deciding on what to do for those at the moment. It probably has about a coke can worth of clearance at the lowest point which is at that weld on the backside of the driver's side cat. I'm very happy with it.

carado1984

i love the sound of those powersticks.. i wish you would have got interchangeable offroad pipes and cats so we could hear both because i know it would sound nasty especially with a cam.. they make those powersticks in shorter lengths right?... im poor ill probably end up going with the tsp true duals if i feel like buying another exhaust..

theblur98ss

iTrader: (71)

I'd love to get that setup out the back of mine. It would make my car alot more livable on the street.

bikemanx2

iTrader: (1)

I was thinking about having the shop flange both ends of the cats so I could have test pipes to replace them with, but I figured with stock cubes 3" exhaust isn't even being utilized and later on when I go with a bigger powerplant 3" will probably be just right, so cats really aren't restricting it much. PLus the shop was kinda iffy about doing it anyways, for legal purposes.

bikemanx2

iTrader: (1)

here's a link to another video I took driving up the mountain, to give you an idea of what it sounds like in the car and driving, the t-tops are off though.
driving vid

oodahss

put a cam in asap. sounds good.

SmokeySS

iTrader: (7)

Aw, I was hoping you'd hammer it at some point in the video!

Looks like a really nice road.

Allergik2dyin

That sounds really good. The kind of set-up I might consider. I had never really thought about under the axel and out the back. Would you have enough ground clearance if you got rims and wanted to drop it an inch or so?

bikemanx2

iTrader: (1)

I would have hammered it at some point during that drive but its kinda hard to haul ***** and video on a curvy road at the same time.

lilbuddy1587

iTrader: (1)

Sounds sinister! FINALLY someone posted/used the power-sticks! Sounds so good man!!

1 SIC Z

iTrader: (34)

Powersticks sound awesome....I hope to have a clip of my set-up this weekend.....

John

BrianC98Z28

iTrader: (11)

whered you get the cats from??

lowprofile

iTrader: (3)

The cats are magnaflow. I just bought this set-up from bikeman for my 01 Z. Ill be installing it this weekend behind Hooker supercomp LT's, and a TR 227/224 cam/AFR heads. Should sound pretty good...

edit: Im lowered with adj. ride height, but I hope to still have decent clearance...

-G

TORCHD 02 TA

iTrader: (39)

subscribed for later