LS6 dyno results before/after
03-01-2003, 10:11 AM
#1
Teching In
Thread Starter
Join Date: Nov 2002
Location: CT
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
LS6 dyno results before/after I'm posting this for research assistance. See below base line signature mods before LS6 intake with EGR mod. Before LS6 328.1 rwhp 339.6 rwtq After rwhp 338.3 rwhp 349.7 rwtq. Net gain 10.2 HP& 10.1 TQ Installation and DYNO runs @ Eastside Performance and Dyno service.
03-01-2003, 06:46 PM
#4
Teching In
Thread Starter
Join Date: Nov 2002
Location: CT
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS6 dyno results before/after The air fuel is at 12.8. I was going to get LS1 edit the same day,but apparently my car did not need any tuning. All you ever here is that headers make you run rich? Maybe, if the Eastside people see the post they could add the printout.
On one hand I was happy, I didn't need to speed the extra $$ on tuning, but on the other hand I couldn't squeeze any extra ponies out of her.
On one hand I was happy, I didn't need to speed the extra $$ on tuning, but on the other hand I couldn't squeeze any extra ponies out of her.
03-01-2003, 07:08 PM
#5
Re: LS6 dyno results before/after Thats not a bad gain considering you're still stock internal. Back in the days when the LS6 intake first came about, everyone said it wasn't worth doing on a stock car. It's definately worth it, as prove here. Congrats! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
josh
josh
