HELP any one with Edlebrock LTs!
#1
TECH Apprentice
Thread Starter
iTrader: (5)
Join Date: Nov 2004
Location: Metro Detroit
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
HELP any one with Edlebrock LTs!
How did you guys go about gitting the Driverside header on? GM high Tech has an artical in their last issue saying they used the "fonzie method" WTF is that?? Ayeeeeeeeee
Thanks,Dane
Thanks,Dane
#2
12 Second Club
iTrader: (4)
Join Date: Sep 2005
Location: Fort Myers, FL
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Mine was hitting the block tab, even though I couldn't see it initially. Sawz-all off the tab. For the "fonzie" method, I think they mean they just hit the header until it slid past the block tab (which is what we did on mine, not seeing that it was hitting the tab). Take a piece of wood, and hold the small piece of wood agianst the flange, and tap it past the block with a hammer (You don't have a lot of room, so you can't swing very hard anyway.)
#5
TECH Enthusiast
iTrader: (7)
Join Date: Apr 2004
Location: Carmel, NY / ATL, GA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by melchoir
Mine was hitting the block tab, even though I couldn't see it initially. Sawz-all off the tab. For the "fonzie" method, I think they mean they just hit the header until it slid past the block tab (which is what we did on mine, not seeing that it was hitting the tab). Take a piece of wood, and hold the small piece of wood agianst the flange, and tap it past the block with a hammer (You don't have a lot of room, so you can't swing very hard anyway.)
Trending Topics
#10
Tech Resident
haha the fonzie method. that is priceless. remember how fonzie used to smack the juke box and it would play a song without him paying? yea, they just smacked the headers in. that's funny as hell.