Edelbrock Victor JR TB flange height question
#1
Banned
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Schaumburg, IL
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Edelbrock Victor JR TB flange height question
Anyone know or can measure for me approx how high the flange for the TB/carb sits from the bottom of the intake/valley cover?
Thanks
Thanks
#2
On The Tree
iTrader: (13)
Join Date: Dec 2005
Location: Northen California
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Aprox. 5 1/4" from the valley cover to the carb flange surface. Aprox 5 1/2" from the engine block top deck to the carb flange. This is what I got for an actual installed height.
The manifold I checked was the one with no bungs drilled, although I beleive both styles are identical castings save for some extra machine work. Mac
The manifold I checked was the one with no bungs drilled, although I beleive both styles are identical castings save for some extra machine work. Mac
#3
Banned
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Schaumburg, IL
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
thanks.. doesnt leave alot of room for an elbow on a vette
i wonder how millable it is.. i've seen some edelbrocks that have carb flanges that you can mill down like 1" and still have a square flange
i wonder how millable it is.. i've seen some edelbrocks that have carb flanges that you can mill down like 1" and still have a square flange