Sound clips!: Duals w/1 chamber flowmasters
08-15-2006, 11:26 AM
#1
Sound clips!: Duals w/1 chamber flowmasters I had some guys asking me if I had any more clips of how the exhaust sounds on my car, so I put together a couple short ones last night, one from in the car and one from outside. I didn’t have anyone to hold the camera for an “outside-the-car” clip, so I had to just set the camera in the driveway and drive by a couple times. I was a little hesitant to post that one, the quality isn’t very good and doesn’t give a real accurate representation of how it sounds. The 1 chambers have two distinct tones in the exhaust note, a higher pitched scream and a very deep bassy rumble. The camera picked up a lot of the higher pitched frequencies and had trouble with the deeper ones. I uploaded it anyway, and hopefully I can recruit the wife to hold the camera and try to get a better outside vid soon. The one from the inside is pretty accurate though.
Vid links are below sig pic, the two new ones are labeled “In-car/3600 stall” and “Drive-by clip”.
Vid links are below sig pic, the two new ones are labeled “In-car/3600 stall” and “Drive-by clip”.
I like the push-button starter as well 
08-15-2006, 02:44 PM
#7
Thanks guys! 
jlashley2001ss: Exhaust is 2.5", no cats, flowmaster H pipe merge, mufflers are dumped right before the axle. The stall actually helped with the interior drone that I get at ~1800-2000 rpm. With the higher stall I rarely hit those rpm's anymore. My old setup of macs/ory/cutout had stab-your-ears-out rasp, this setup has none at all.
jlashley2001ss: Exhaust is 2.5", no cats, flowmaster H pipe merge, mufflers are dumped right before the axle. The stall actually helped with the interior drone that I get at ~1800-2000 rpm. With the higher stall I rarely hit those rpm's anymore. My old setup of macs/ory/cutout had stab-your-ears-out rasp, this setup has none at all.
Trending Topics
08-15-2006, 02:47 PM
#8
Tech Resident
Originally Posted by jlashley2001ss
I noticed your are looking at getting true duals. You going with a catted system? you going over the axle?
08-15-2006, 04:00 PM
#9
TECH Apprentice
Join Date: Dec 2004
Location: Evansville, IN
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jmm98LS1
Thanks guys!
jlashley2001ss: Exhaust is 2.5", no cats, flowmaster H pipe merge, mufflers are dumped right before the axle. The stall actually helped with the interior drone that I get at ~1800-2000 rpm. With the higher stall I rarely hit those rpm's anymore. My old setup of macs/ory/cutout had stab-your-ears-out rasp, this setup has none at all.
jlashley2001ss: Exhaust is 2.5", no cats, flowmaster H pipe merge, mufflers are dumped right before the axle. The stall actually helped with the interior drone that I get at ~1800-2000 rpm. With the higher stall I rarely hit those rpm's anymore. My old setup of macs/ory/cutout had stab-your-ears-out rasp, this setup has none at all.
08-15-2006, 04:17 PM
#10
Originally Posted by Iron Sights
You aren't kidding! I couldn't hear a hint of rasp. I decided on single-chambers a while ago, now I just have to make my damn mind up about getting an X or H-pipe. Awesome setup.
I guess i could take a soundclip of mine for you
Pretty similiar setup
232/242 cam on a 111LSA
TSP TD's x-pipe with 1-chamber flows
Mine's a T56 though
08-15-2006, 04:32 PM
#11
TECH Fanatic
iTrader: (15)
Join Date: Apr 2005
Location: West Seneca, NY
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
what are the specs of ur cam? that sounds sweet, i'm not sure what i wanna do when i ditch the loudmouth, i'm thinkin cutout in the y pipe ... (with long tubes)
08-15-2006, 04:49 PM
#12
Originally Posted by 98_Formula
what are the specs of ur cam? that sounds sweet, i'm not sure what i wanna do when i ditch the loudmouth, i'm thinkin cutout in the y pipe ... (with long tubes)
headers/ory/cutout will make you want to jam a pencil in your ears--ask me how I know
....won't sound any better than the loudmouth.
08-15-2006, 09:38 PM
#15
10 Second Club
iTrader: (5)
Join Date: Jan 2003
Location: Fort Worth, TX
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tim99ws6
I guess i could take a soundclip of mine for you
Pretty similiar setup
232/242 cam on a 111LSA
TSP TD's x-pipe with 1-chamber flows
Mine's a T56 though
Pretty similiar setup
232/242 cam on a 111LSA
TSP TD's x-pipe with 1-chamber flows
Mine's a T56 though
08-16-2006, 07:27 AM
#18
Tech Resident
Originally Posted by Iron Sights
You aren't kidding! I couldn't hear a hint of rasp. I decided on single-chambers a while ago, now I just have to make my damn mind up about getting an X or H-pipe. Awesome setup.
almost everyone on this site with TD's has an X-pipe. be different, stand out from the crowd and make your own sound!
08-16-2006, 11:13 AM
#20
Banned
iTrader: (2)
Join Date: Oct 2003
Location: New York
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
could you please tell me where you got the push button deal from?
I been DYING to do that to my car since my wifes new BMW came with it and I am just REALLY jelous and she pushes it in my face ALL THE TIME.
Where can I get this kit?????
I been DYING to do that to my car since my wifes new BMW came with it and I am just REALLY jelous and she pushes it in my face ALL THE TIME.
Where can I get this kit?????