Help, steering knuckle rubbing headers!
09-09-2006, 12:17 PM
#1
FormerVendor
Thread Starter
iTrader: (15)
Join Date: Jun 2006
Location: Los Angeles, CA
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Help, steering knuckle rubbing headers! I put LT Pacesetter headers on my 98' Camaro Z28 and I had to dent the header a little and grind the steering knuckle to get it back on. But it still rubs pretty bad. Has this happened to anyone else?? How do I fix it? Thanks, Steve.
09-09-2006, 01:40 PM
#3
On The Tree
iTrader: (3)
Join Date: Feb 2004
Location: Duncan, Oklahoma
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
had the same problem on a ta that had been wrecked. there are 2 different racks for these cars.put the right rack on it and the steering arm was at a diffefent angle and it cleared fine.this was after about 2 days work, denting the header about 1/4 way shut and trying several suposedly right racks from auto zone.got a used one from a z/28 and has over 1" clearance--other one's must have been from 6 cyl cars.
09-09-2006, 05:52 PM
#4
FormerVendor
Thread Starter
iTrader: (15)
Join Date: Jun 2006
Location: Los Angeles, CA
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cncbird
had the same problem on a ta that had been wrecked. there are 2 different racks for these cars.put the right rack on it and the steering arm was at a diffefent angle and it cleared fine.this was after about 2 days work, denting the header about 1/4 way shut and trying several suposedly right racks from auto zone.got a used one from a z/28 and has over 1" clearance--other one's must have been from 6 cyl cars.
