Help!!!!
10-21-2006, 11:14 AM
#1
Teching In
Thread Starter
Join Date: Oct 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Help!!!! Does anyone have a trick to get to the back bolt holding the coilpack bracket on to the valve cover on the passenger side? I have been donating blood all morning, and cannot get to the stupid bolt 
10-21-2006, 11:40 AM
#2
Launching!
iTrader: (2)
Join Date: Jun 2006
Location: Powell, Ohio
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
No real trick.....just be patient and you will get it. After you get it; do like I did and throw the damn thing as far as you can 
It will help relieve some of the frustration!
I used a small ratcheting style wrench so once I had it on the bolt I didnt need to keep replacing the wrench on the bolt. Also if you are just changing plugs you dont need to totally remove the bolt. Just get it loose then swing the coil rail up toward the intake to get you more room.
Good luck
It will help relieve some of the frustration! I used a small ratcheting style wrench so once I had it on the bolt I didnt need to keep replacing the wrench on the bolt. Also if you are just changing plugs you dont need to totally remove the bolt. Just get it loose then swing the coil rail up toward the intake to get you more room.
Good luck
10-21-2006, 08:39 PM
#7
Teching In
Thread Starter
Join Date: Oct 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02NHRAtransAm
yea...as they said **** that bolt 
toss its *** away lol 
toss its *** away lol 