borla problems...
12-27-2006, 02:38 PM
#1
Teching In
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Virginia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
borla problems... 
everyone seems to have their tips centered...I have had mine to 2 different shops that say they cant get the passenger side over where it should be because of the spare tire well...I have looked at it and cant figure it out either so either we are all idots or there is something we arent getting...the drivers side looks fine but the passenger side is over towards the center too far.Any help/ideas? 
12-29-2006, 02:13 PM
#3
Teching In
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Virginia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by INMY01TA
Mine was kinda the same. We heated it up with a blowtorch till it was glowing and used a prybar to bend it a lil.
12-29-2006, 02:14 PM
#4
Teching In
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Virginia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by joenels
heated up the exhaust pipe and bent it or the spare tire well?It looks like to me in order to keep the over the axle pipe away from the frame it needs to sit where they have mine...but that puts that tip too far over and like you said the pipe needs to be bent quite a bit over towards the outside of the car...
12-29-2006, 02:22 PM
#5
Originally Posted by joenels
oh yeah on a side note...how do I get that damn dealer sticker off without f-ing up my paint?
Trending Topics
12-29-2006, 02:57 PM
#9
Originally Posted by joenels
BFH? and I bought it used from a private owner...
Hey sorry bout that yea as the guy above said big ******* hammer. Thats what I had to do when my slp lm pipe as bent a little from the previous owner. I didnt have a blow torch or anything fancy like that but I eventually got it straight.