headers not coated
#2
TECH Fanatic
iTrader: (20)
i was told by the old timer that machined my race block that if you wrap headers up, they are great for drag cars only and not good for daily use b/c it can cause the headers the crack.
BUT.....
I have a lot of biker freinds and some of them that have worked engines use header wrap and their pipes never crack. then again, those are already coated...
If I was you... i send them to get those headers coated. i have 40k miles on my headers and they haven't lost their shine too bad, but rough compared to new.
BUT.....
I have a lot of biker freinds and some of them that have worked engines use header wrap and their pipes never crack. then again, those are already coated...
If I was you... i send them to get those headers coated. i have 40k miles on my headers and they haven't lost their shine too bad, but rough compared to new.
#5
10 Second Fun Car
iTrader: (7)
The under hood temperature will be hotter, but how much Im not sure. I dont think this would cause the motor to run hotter, and if it did it wouldnt be much. Here is the place where I would go to get them coated.
http://www.jet-hot.com/
http://www.jet-hot.com/
#6
TECH Fanatic
iTrader: (20)
uncoated... yes hotter than coated... but from my sisters ws6 that still has stock headers and to mine... i think they stay at the same temperature, but the coated headers cool off quick. my coating is starting to get rough looking, but after i first installed them i could touch my primaries after 15 minutes from shut down after driving around for an hour. the cool of QUICK!!!