intake issues
02-01-2007, 10:39 PM
#1
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: Northern NY
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
intake issues I seem to have a problem with keeping my airlid connected to my maf sensor. I have a granettelli air lid and a granattelli maf sensor. is there something I am supposed to aid in between the two? It seems as if the lid will not seal tight enough and the maf slips out. I am just worried that i will suck something into my engine and then i will have a bigger problem then what I am dealing with now. Any suggestions would be greatly appreciated.
thanks in advance
thanks in advance
02-01-2007, 10:44 PM
#2
TECH Resident
iTrader: (26)
Join Date: Apr 2006
Location: Ft Wayne, IN
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
ditch the granatelli maf. stock will work better. if you insist on keeping this on your maf end the part that slides into the lid....wrap that a couple times with electrical tape to thicken it up and let the lid tighten down on it you just dont want to crack it
02-01-2007, 10:52 PM
#4
TECH Resident
iTrader: (26)
Join Date: Apr 2006
Location: Ft Wayne, IN
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
most tuners wont mess with the aftermarket mafs...thats my only reason. and i believe the give the 02s a false reading wich in returns leans the car out a tad=more power. do you think what i suggested will work i am nowhere near a car right now and going of the top of my head