amsterdamn

iTrader: (3)

Professional Products 85mm throttle bodies are shipping out finally! Ordered both a Typhoon intake and this TB back in September. Got the intake in a few weeks, but sold it to a friend of mine, and the TB just got here yesterday. I'm going to order a new intake soon to replace the one I sold. I know it's been a long wait, but I still want to thank Jim Davis at Professional Products for excellent customer service.

JPH

iTrader: (2)

for the money, i think these t/b's are hard to beat.

LS1Formulation

iTrader: (13)

Wonder if a FAST 78MM intake could be modified to use this TB. I'm getting one cheap and this might be the way to go.

orangeapeel

iTrader: (18)

Damn.....I would still port on that thing just from looking at that picture. Looks like a stocker that has been ceramic coated.

dpw41285

iTrader: (26)

just got one in today from jph and it no way resembles a stock one at 85mm. they come with a reducer like the bbk a gasket new bolts and and both cam arm styes. they really did a nice job and that pic does no justice. i didnt get polished because my weiand isnt polished.

amsterdamn

iTrader: (3)

dan_e

iTrader: (1)

I have the NOS LS1 plate N20 system, guess I could still use it behind that adapter then?

Stinks, cause I will miss out on those extra 7mm of air volume.

amsterdamn

iTrader: (3)

I don't know... throttle and traction control cables might be an issue.

dan_e

iTrader: (1)

Maybe a certain Sponsor will be developing a 85mm N20 plate?

LS1Formulation

iTrader: (13)

I'd still like to know if you could possibly open up the FAST 78MM intake to use this TB. That's only a 3.5MM increase all around. It would be a rather cost effective alternative to a 90/90 setup.

noxiouSS

iTrader: (11)

will the 85mm fit on an ls6 manifold?

FRUSTRATED T/A

iTrader: (13)

i have the 96mm intake version which has four bolt holes for the tb. Is their another 85mm version for my intake. Or do i have to wait another four monthes for the 96mm tb. and who has them in stock?

dan_e

iTrader: (1)

Subscribing

Heard from Pro Products this week the 96mm TB is "a few weeks away."

Also, from what I have seen, the 90mm TB (FAST/Williams) will work on the 96mm manifold. Curious if you have tried to mate one up?

FRUSTRATED T/A

iTrader: (13)

acuatuly i was thinking about it. The only reasen i havent is because the pp tb is half the cost, but twice the wait. I believe the gto 90mm one will fit, but i need cable driven not fly by wire.

dpw41285

iTrader: (26)

or you can take the adapter(assuming your using stock manifold) and tap into the reducer for a "nozzle"

snketr

iTrader: (3)

Who carries the manifolds and TB? I can't find any pricing on them.

NemeSS

iTrader: (127)

i dont think the 96mm will be cable operated, i think they are for ls2 and c5
type tb's the drive by wire, but i think they will have a conversion kit, to use a cable.

amsterdamn

iTrader: (3)

Byunspeed and Exotic Performance Plus are two I know of.

dan_e

iTrader: (1)

Yeah, my thoughts exactly.

dan_e

iTrader: (1)

I have talked to one vendor today that has a 96mm manifold on hand (just received), but with blue fuel rails. So these dudes are shipping as we speak. I didnt ask if it comes with a reducer to use with a 90mm TB??

Trying not to be too impatient, but dont want to have to settle on a 90mm, then later buy a 96mm.

FAST and Nick Williams sell cable operated 90mm TBs.